Biotage Turbovap Ii Evaporation System

By following the ongoing market developments and trends, we are the leading Manufacturer & Supplier of Biotage Turbovap II Evaporation System in Mumbai, Maharashtra, India. The new TurboVap II is built on the solid foundations of reliability and performance that made it the market leader for solvent evaporation. The unit provides parallel evaporation of up to 6 samples in either 50 mL or 200 mL glassware with or without end point detection. The modern design incorporates many new customer driven features for easier use and expanded functionality. TurboVap II still utilizes the highly efficient patented gas vortex shearing technology, which is synonymous with the TurboVap brand.

Like the traditional system, racks are available to accomodate both 50 mL and 200 mL evaporation tubes, with and with out the end point sensors. The new TurboVap II is designed so that it can be easily and quickly converted between the functionality of the traditional LV and II instruments if evaporation needs change, without purchasing a whole new unit.

Technical Specifications
Gas Supply and Connection
The system can operate using inert gas.A Compressed air can be used but is not recommended with some solvents due to the possible risk of explosion. The gas tube supplied with the system has a 6 mm outer diameter. An adapter for connecting a gas tube with an outer diameter of 1/4" can be purchased separately.
Note: There is no regulator for the gas inlet supplied with the system. This can be purchased separately as an optional accessory (P/N 352281SP Air Control Unit and P/N 353480SP Supply Connection Set).
Minimum supply pressure: 4 bar (0.4 MPa, 58 PSI).
Required supply pressure for full flow capability: 6 bar (0.6 MPa, 87 PSI).
Maximum pressure: 9 bar (0.9 MPa, 130 PSI).
Required supply flow for full flow capability:
6 positions: 50 litres/min
Water Bath Temperature Range
Ambient to 90A C, A 2A C accuracy
Temperature Increase
Heating time from 20A C to 55A C is approx. 40 mins.

Gas Flow Range
The maximum gas flow depends on the gas supply pressure and flow, the number of available nozzles and how many that are open. The maximum gas flow for each nozzle:
6 positions: 7 litres/min

Racks and Tube Sizes
TurboVap II rack with or without end-point sensors:
6 positions for 50 and 200 mL evaporation tubes with 0.5 and 1 mL end-points
Interfaces
Touch Screen
7 Inch Touch ScreenA A A A A A A
Auxiliary
Connection for end-point detectionA A A A A A
System
Fume Hood/Ventilation
The system must be either connected to ventilation system using the exhaust outlet at the rear of the system or placed in a well-ventilated fume hood or an equivalent enclosure to reduce the risk of exposure to harmful solvent vapours. The ventilation system or fume hood must be capable of exhausting 1 m3/min (35.3 ft3/min).
Connection: The exhaust hose supplied with the system is 3.8 meters (12.5 feet) and has a 50.8 mm (2") inner diameter.

Operating Temperature
18A C to 32A C
Storage Temperature
-25A C to 60A C
Humidity 20% to 90% RH (non-condensing)
Electrical Supply 100-127 V and 220-240 V at 50/60 Hz
Fuses F10A at the power inlet (1 required)
Max Power Consumption
1000 VA
Weight
17 kg (37.5 lbs) when the water bath is empty and maximum 29 kg (63.9 lbs) with deionized water, rack, and tubes.
Dimensions (W x D X H) 400 x 400 x 390 mm (15.7" x 15.7" x 15.4") including the hinges at the side and exhaust at the rear. The height with the lid open is 590 mm (23.2").
Max Sound Level 75 dB(A)
Certifications -CE marked and CB and NRTL certified.