Camber Board

Camber Board: MTBA -05

Camber is defined as the slope provided to the cross-section of the road. It expressed as the ratio of the crown height to half the horizontal width of the carriageway for example if the camber is 1 in 45 it means for every horizontal length of 45 m measured from the center of the road towards its edge the rise is of the crown is 1 m it is also expressed as percentage a chamber of 2% means 2 m rise of the crown for 100 m horizontal length of the road in other words 2% camber =2/100 i.e. 1 in 50 it is expressed as the slope of line or the line ration C : b/2 it is also expressed as a percentage.

Features

High quality
Efficient
Durable
The original, arc-shaped profile.
Best for high speeds, carving, stability
Packed, groomed snow, all-mountain
Board has an obvious front & back
Nose easily floats above powder, stiff tail maintains stability at high speeds
Powder, free ride
Flow Infinite
Camber angle (negative angle)
Spindle angle
King pin axis
Scrub radius

Technical Specification

Ratio 2.0%, 2.5%, 3.0% or as per requirement.
Material Aluminum section of size 24 mm x 45 mm of thick gauge.
Size 3 meter, 3.5 meter, 3. 75 meter or as per requirement.
Camber depends on the nature of the road surface and the rainfall in the area
Indian road congress (IRC) has given recommendations for camber of various road surface
Earth road 3% to 4%
Gravel and water bound macadam road 2.5% to 3%
Bituminous road (thin surface) 2% to 3%
Cement concrete and high type bituminous surfaces 2%

Accessories
Magnetic
Spirit level
Seat for it at center