Electric Vehicle Power Inverter 60v 300w

We are offering our customers a wide range of Electric Vehicle Power Inverter 60V 300W.
1. Working condition:
Put the product in the dry, ventilated and cool place. Keep the product away from water or rain.
Working(operating) temperature: 14A F-140A F ( -10a -+60a )

How to use:
1. Turn off the inverter switching.
Check if power supply input port's anode and cathode of electric vehicle is correspond with inverter's anode and cathode. The N port of inverter is anode. The L port of inverter is cathode. Notice that electrodes should be connected in right way.

2. The red terminal of inverter is anode. The black terminal of inverter is cathode. The inverter terminal should be connected with the matching connector wire. Open the inverter switch. If the green indicator light is lit, it shows that the power inverter works well. If the red indicator light is lit, check the following:
a.Whether the input voltage is too high or too low
b.Whether power is below the nominal power
c.Whether the temperature is too high

3. If the anode and cathode random connection of inverter happens, the inverter will not work normally. At this time, please remove the fuse besides to terminal. Displace it with another fuse. Then the inverter can work normally.

4. Technical parameters:
Input Voltage: 52V-72VDC
Output Voltage: 200V-235VAC
Frequency: 50A 2 Hz
Waveform: Square Wave
Fuse: 10A
Undervoltage alarm: 51V
Overvoltage alarm: 73V
No-load current: 0.2A
Maximum power: 260W
Peak power: 500W