Epo-tek Fiber Optic Epoxy Glue 353nd

Product Type : Fiber Optic Epoxy Glue
Form : Liquid
Quality : High
Brand : Epoxy Technology
Pack Size : 350 Gram

Product Description:

1. 353nd is a two component, high temperature epoxy designed for semiconductor, hybrid, fiber optic, and medical applications.
Also available in single component frozen syringe.

2. Storage of 353nd Epoxy, 353ND PartA & B requires storage at room temperature when not mixed, without refrigeration.
If is stored below 0 A C, it must be warmed at room temperature for at least 3-4 hours before A & B mixing.
This process is to prevent moisture from generating moisture in Epoxy and to avoid bubbles when the material solidifies.

3. Fiber optic epoxy 353ND Part A & B mixing process : As 353ND Part A & B is packed in 4g A-Pack plastic bag, A & B components have been divided according to proportion The shaft is squeezed vigorously from the end of component A to allow the resin to move towards the seal of component B. B /. Press hard so that the resin can break through the interlayer. C /. Then fix the end of the plastic bag and run the resin from beginning to end until the components A and B are completely until it is mixed. D /. Cut the end of the plastic bag and extrude the 353ND that has been mixed to apply.
* Such as 353ND Part A & B packaging is a large-volume packaging (such as tin cans, plastic bottles or glass bottles, etc.), first, shake parts A and B separately, then take PartA 10 parts and 1 part 1 Place in glassware and mix well. If a large amount of bubbles are found after mixing, should go through the defoaming procedure before being applied. There are two types of deaeration methods: vacuum deaeration and centrifugal deaeration.

4. Fiber optic epoxy 353nd can be used after mixing (Pot Life) and the amount of 353ND can be used for 4 hours after mixing, so the amount should be controlled so that the resin technology performance index is the best. Because after mixing all the epoxy resins, if it exceeds the usable time its viscosity will change and affect the adhesion. Epoxy Technology Inc. It is recommended that the dosage of should not exceed 25g each time. 4. Epoxy Technology Inc. The curing time following the curing time and temperature data for user reference 60 a 1.5 hours 80 a 15 minutes 100 a 5 minutes 120 a 2 minutes 353ND 150 a 1 minutes curing at 150 deg.] C or where The curing starts at 200 seconds for the first 10 seconds, so the additional curing temperature and time provided above are for reference only, and at the same time, it also generates some heat during curing. Under normal circumstances, it is not recommended to cure at a temperature above 150 a , preferably at 150 a for 1 minute or at 80 a for 15 minutes.