Gsm Rtu For Variable-frequency Drive Remote Control Monitoring System

Being the most respected organization guided by experienced and knowledgeable professionals, we are the famous Exporter & Manufacturer of GSM RTU for Variable-Frequency Drive Remote Control Monitoring System in Shenzhen, Guangdong, China.
Model:S273

The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.

Mainly Features:
1. ARMAR Cortexa c-M4 32 Bit RISC Core, 168 MHz inside, RTOS system;

2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;

3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;

4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;

5. 4 Relay outputs, 5A/30VDC,5A/250VAC;

6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;

7. 1 temperature probe input, 1 humidity transducer input;

8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;

9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;

10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert;