Insutester

Smart FeaturesGuard Terminal to eliminate surface leakagesDouble Reinforced Insulation (Shock Proof)General FeaturesRugged, Reliable & PortableContinuity MeasurementSelect Test voltage 250, 500, 1000V DC OutputInsulation Resistance Measurement in two ranges 200MOhm & 2000MOhmHigh Voltage HV ON indication SPECIFICATIONS GENERALDisplay                                                  : 3 digit LCDEnclosure Material                                : ABS casingDimensions (W H   D)                     : Approx. 175mm 85mm 41mmWeight                                                   : Approx. 425gm. (With battery)Over range indication                            : Indicated by displaying 1 ENVIRONMENTALOperating Temp                                : 0C to 50CStorage Temp                                    : -25C to 60CRelative Humidity                             : 90% RH at 40C max. POWERBattery                                            : 6 X 1.5V AA cells IEC LR6 AlkalineLow Battery Indication                   : LO BAT is displayed SAFETYCE CertificationsMeasurement Category                       : CAT II(1000V)/CAT III(600V) Reinforced InsulationRelevant Standard Specifications       : Safety According to EN 61010-1 EMC According to EN 61326-1 TECHNICAL SPECIFICATIONS Measurement Function Range Resolution Accuracy (% reading +dgt) Overload value and duration Insulation Resistance MOhm 200MOhm 2000MOhm 0.1MOhm 1MOhm (5% 2) 230 V DC/AC rms 30 sec Test Voltage 250V 500V 1000V    NA (10% 5) 230 V DC/AC rms 30 sec Continuity 0-19.99Ohm 0.01Ohm ( 3% 5) 230 V DC/AC rms 30 sec RECOMMENDATIONSAccuracy is not valid if display shows LO BAT.  In this case immediately replace the batteryIt is recommended to recalibrate the instruments once in a year ApplicationElectrical SwitchboardIndustrial, Commercial & Residential installationsElectrical Equipments (Switchgear, Motors, Transformers, Machines etc.)House Hold Appliances (Washing Machines, Mixer etc.)Cables & WiringsPumps STANDARD ACCESSORIESCrocodile Test lead set with 1 Meter long (Jaw Size: Approx 15.0mm)Instruction ManualBatteries 6 X 1.5V AA, Alkaline ( IEC LR6)Calibration certificate OPTIONAL ACCESSORIESTest Lead Set with one end pointed tip and another with 4mm shrouded banana