K2 Unifloor

K2 Unifloor gives heavy duty tough abrasion resistant concrete surface. also provides strong monolithic bonding with concrete at green stage.

Benefits:

Properties:

Area of applications:

Floor subjected to heavy wear and tear, heaviest traffics like work shops, industrial floor, ramps, spill ways and loading bays etc.

Application Procedure:

Features of Base Concrete

• Minimum cement content of 300kg/m for base concrete
• Concrete design-mix should be free from segregation and bleeding
• Water Cement ratio should be in controlled with 0.53
• Initial slump retention should be in between 50mm to 75mm
• It is recommended to use K2 Reduplast WPA water reducing admixture at the time of concreting
• The base concrete should be laid and compacted.

Dosage

Recommended rate of application for low traffic is 3.5Kg/m, Medium traffic 5Kg/m and 7Kg /m for high and heavy load bearing areas.

Spreading

K2 Unifloor should spread or sprinkle as per the requirement at the point when base concrete get stiffened and light foot traffic leaves an imprint of about 3mm. The bleed water should now have been evaporated.

Finishing

Finishing should be done with power trowel when the floor gets stiffened sufficiently, so that damage or surface cracks should not be formed.

Curing

Curing plays an important role for better and long lasting concrete. The most efficient way to get concrete cured is using curing compound or else go for polythene sheeting or water ponding or wet burlaps.

Limitations

For concrete with optimized water cement ratios, K2 Unifloor shall not be sprinkle over 3-4 Kg/m.

Packaging

K2 Unifloor is supplied in 25 Kg Polythene Sacks.

Storage

If kept in original unused packing, the shelf life of K2 Unifloor is 12 Months from the date of manufacturing.