Aluminium Kemclean-cdx-40(heavy Duty Alkaline Degreasing Com

Kemclean-CDX-40(Heavy Duty Alkaline Degreasing Compound)
(Heavy Duty Alkaline Degreasing Compound)

Product Description
Kemclean-CDX-40 is specially formulated Non Ionic surfactant for the removal of oil, grease, dirt and other foreign contaminants from the surfaces of the ferrous metals. This product is generally used to remove not only mineral oils and greases but also lanoline, Palm oil etc. by hot dip application.

Product Specifications

Product Operating Data

Product Operating Procedure
Fill the Kemclean-CDX-40 tank with 2/3 of water and heat it about 50^oC. Add 5 kgs. Of Kemclan-CDX-40 powder in 100 ltrs. bath with continuous agitation till the chemical is completely dissolved. Fill the tank to the operating level and raise the temperature to 85^oC. Stir the bath and draw the sample for the determination of pointage.

Strength of Kemclan-CDX-40 bath can be increased if the components are heavily contaminated with heavy oil or grease. Maintenance of the temperature is also a very important factor. If the temperature of the bath is low, the efficiency of the degreasing chemical will be affected even if the concentration and the treatment time are increased. The components should be thoroughly rinsed with over flowing system until unless Kemclean-CDX-40 is completely removed.

Product Application Equipment
Kemclean-CDX-40 tank should be fabricated with 3 to 4 mm thick M. S. plates with continuous agitation arrangement by convection current from a heating unit.

Testing and Control Procedure
Pipette out 10 ml. of the bath solution into a conical flask. Add 90 ml. of distilled water and add 2 to 3 drops of indicator methyl orange indicator. Titrate against N/10 sulfuric acid till the colour changes from yellow to red. The burette reading is the pointage. The pointage of the degreasing should always be maintained at the recommended level

Chemical Replenishment
The efficiency of the degreasing bath falls due to the carry over of oils coming from the work, is emulsified in the bath solution and presence of the sludge at the bottom. At this stage, Kemclean-CDX-40 bath should be discarded.

Safety Measures
Kemclean-CDX-40 contact with skin, eyes, and clothing should be avoided and proper safety precautions should be taken by the operators by using gloves, goggles and safety clothing. In case of accident, the affected portions should be continuously flushed with water and a physician should be immediately consulted.

General Information
Paint Adhesion: Good
Gloss Retention: Good.