Lambent Application: House

LambentSeries: FTL - 100 is developed for providing Flicker free dimming of Fluorescent lamp / CFL from 100% to 10% or 100% to 0% intensity from a compact wall mounting interactive panel. Dimmable ballasts with 0 - 10V controls to be used with Fluroscent lamps. Number of vendors like Philips and Osram makes such Dimmable Ballasts for single and twin tubes. Lamp intensity can be set from front panel keys without need for any computer or computer knowledge. Panel keys and LCD display makes the 8 Moods of lighting scenes setting simple internal memory saves the setting fro recll later from the panel Unit is designed for continuous duty operation on 24x7 basisFluorescent Tube Dimming Controller gives 0 - 10 V DC signal at 10 mA for each of the channel enough to drive 10 Dimmable Ballasts which can control upto 10 Fluorescent tubes per channel. Two models are available each of Four channels for making fluorescent lamp full off to 0% intensity to suit the specific requirement. Both models can programme upto 8 moods and off and store intensity setting in internal memory.Unit is built on modular switch plate of Anchor / Crabtree for recessed wall mounting using standard wall boxes.SpecificationsDescriptionModel FTL - 101Model FTL - 102Number of Channels4 nos4 nosMaximum Number of Dimmable Ballast Loads40 nos40 nosMaximum Number of Fluorescent lamp loads80 nos80 nosInternal Switching Relay 5A for 0% dimmingNil4 NosDisplay16 x 2 LCD interactiveDC Control Signal / Channel0 - 10 V DC @ 10mAInput Power Supply12V DCTerminalsScrew Type for 1.5 sq mmSize Wall Panel8 module 180(W) x 150(H) x 60(D)Models with Other Configuration of Dimming and Switching also available