Lj-5512l-2 Lithium Battery Formatting And Filtration Device

These LJ-5512L-2 Lithium Battery Formatting and Filtration Device is made up of computer, communicating interface and the tester. The tester contains clamps, clamp boards, C-C C-V source, sampling circuit, single chip PC and controlling board.
Performance:
l One device could C-C C-V charge/discharge and test 512 batteries.
l Since the constant-stabilized power supply is used, there is no shock in switching from constant current to constant voltage and it is especially suitable for charging lithium batteries.
l Using Intel80C196 single chip computer controlling centrums, and assort with outside sampling circuit, the device can work with /without the upstream computer, and finish testing on C-V charging and C-C discharging.
l When charging, C-Charge firstly, when the voltage arrive the set one, C-V charge, when times up, finish charging. When C-C discharging, the voltage is below the set one, finish discharging and the light correspond with the battery turns on.
l With data power-off protection function, it can continue to run when powered. The time of inspecting an entire cabinet is 15 seconds.
l The upstream computer can set 64 work steps. Each upstream computer can connect 1-10 single chip PC system.
l The height of the clamp is adjustable, and the height of the battery should be5-58mm, and the space between each clamp is 50mm.
l The testing results are recorded and data processed.
Technical specifications:
C-C current range: 0.01i 1.999Ai resolution: 1 mA.