White Ls108d Lens Transmission Meter For Various Ir Ink Transmittance Tests

LS108D lens transmission meter is professionally used for mobile phone lens transmittance test and IR hole infrared transmittance test. The test aperture is 0.5mm, which can test 550nm visible light transmittance and 850nm, 940nm infrared ray transmittance. The lens transmission meter has a real-time dynamic self-calibration function. It will automatically calibrated to 100% transmittance after powering on. This lens transmission meter has a test aperture of only 0.5mm and has wide application. The test principle of the lens transmission meter is that the light source illuminates the transparent material, the sensor detects the incident light intensity of the three light sources and the light intensity after passing through the measured transparent material. The ratio of the transmitted light intensity to the incident light intensity is the transmittance, expressed as a percentage.

Small test aperture, widely applicable
The test aperture of this lens transmission meter is 0.5mm. Materials whose size are larger than 0.5mm can be measured

Three-in-one light source path
The three light sources share a test hole. Three data can be obtained by measuring for just one time and the test hole has an LED light for alignment, which is used to align the hole with the mobile phone lens during the test

Real-time dynamic self-calibration
The transmission meter has real-time dynamic self-calibration function which can automatically calibrated to 100% transmittance after starting

Large LCD screen, Three display interfaces are available
The meter features large LCD display screen, and three display interfaces are available for selection. Both 850nm and 940nm infrared ray transmittance can be selected to display or only one of them

Offer free computer software
Free computer software can be run via Type-C interface to complete QC insptection in the production testing process. Please refer to the software and user manual in the attached U disk for details


Application:Measure the Transmittance of Ultraviolet, Infrared and Visible Light
Usage: Measure the Transmittance of Ultraviolet, Infrared and Visible Light
Dimension(L*W*H):170*180*144 Millimeter (mm)
Port Size: 0.5mm
Number of Specimens: 1
Test Range: Peak Wavelength 850nm/940nmA A A peak Wavelength 550nm
Operate Method: Place directly for measurement
Classification: Spectrum Transmission Meter
Product Type: Spectrum Transmission Meter
Power Supply: DC5V/1A
Test Width: 0.5 Millimeter (mm)
Control Mode: Handheld