Myjg-100 Co2 Power Supply

We export MYJG-100 CO2 Power Supply in Jinan, Shandong, China. General use MYJG-100/130/150 100W/130W/150W CO2 Laser Power Supply for 1400/1650/1850mm CO2 tube for engraving or cutting machine
1. Product Features:
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories.
2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3. The laser output power can be adjusted by 0-5V analog signal or PWM signal.
4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function canprotec power supply when laser tube burst.
2. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.
3. Specification:
ItemMYJG-40MYJG-60MYJG-80MYJG-100MYJG-130MYJG-150
30KV35KV45KV50KV50KV50KV
20mA23mA30mA30mA35mA38mA
Input AC VoltageAC220V or AC110V
Input DC VoltageDC 300V or DC150V