Poly Stick

The Poly - stick is self adhesive water proofing membranes which is also a SBS polymer modified bitumen membrane. It  has a high density cross limited polyethylene film on one side and the other side with a silicon coated release film. Application Procedure:-Poly - stick should be laid on clean dry firm surface free on loose particles. Application temp to be between 4 oC to 45 oC. Apply a coat of bitumen primer @ 0.20 ltrs./sq. mtr. & allow to dry. Lay the Poly - stick membrane after peeling off the release film. Ensure overlaps of 75 to 100mm. Place the protection board on top of the membranes to prevent any damage from exposure to sunlight backfilling etc.Technical Data:- Thickness 1.5mm & 2 mm. Roll size, mtrs. 10 x 1 Weight, kg/roll 25 to 35 Carrier weight 120gsm modified Coating Asphalt SBS modified Softening point oC 110 to 125o Tensile strength [L/T/N/5cm 140 /120 Penetration at 25oC /100/5sec 50 Elongation at break % 300 Water absorption 25oC for24 hrs. Nil Cold flexibility -5oCNoo cracks Heat resistance at 100oC No Flow Resistance to Ageing > 200hrs. No Deterioration Advantages:- Cold applied, Excellent adhesion to vertical and horizontal surface, Resistance to chlorides, sulphates, acids, alkalis, heat, tear, and puncture. Water and vapour proof.Storage Handling & Safety:-Poly - stick should be stored vertically in cool dry covered area. Direct contact with sunlight & fire to be avoided. Gloves, goggles, boots & masks recommended while application. Care to be taken during loading & unloading to avoid damages.