Polyurethane Wood Varnish

Maydos Extra Clear Polyurethane Wood Varnish is a high quality 2-component polyurethane finish.It is your best choice for decoration and protection of various wooden surfaces. Its high film building character can bring out natural wooden beauty to the full.

Instructions/application recommendation of painting system:
1, Make sure all the surfaces are clean,dry and free from wax, grese,oil,etc;
2, For bare wood,sand it down in the direction of the grain until ita s smooth.Start with 80# sandpaper,and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3, If you are using paint as the topcoat over another finish,sand the existing finish first with steel wool or synthetic steel wool.
4, Apply a thin coat of paint on the wood and allow it to dry completely.After the first coat is dry,sand it lightly with fine abrasive paper to remove any raised grain.
5, Brush or spray another coat of paint and allow it to dry.
6, Continue to apply coats of paint until you achieve the surface build-up that you desire.
7, Check the finish to see whether there are small nicks or imperfections.Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, polish the surface with wax or furniture polish.

Usage:
This Polyurethane Wood Varnish is suitable for wooden surfaces of various kinds of wood works like furniture,bed,desk,chair,etc.