Stainless Steel Fasteners - Various Sizes M12 To M150, Length Up To 1000 Mm | High Tensile Strength, Accurate Dimensions, Rugged Design

In order to cater the variegated demands of our clients, we are capable of manufacturing and supplying premium quality Stainless Steel Fasteners. Offered fasteners are manufactured under our expertsa supervision by utilizing premium grade stainless steel and sophisticated technology in compliance with set industry norms. These fasteners are highly acclaimed in the market for its rugged design and accurate dimensions. To avoid any kind of defect at clientsa end, the provided Stainless Steel Fasteners passes through numerous checks. Features:High tensile strengthSturdy constructionExcellent strengthSeamless finish Details:These are available in different: Sizes: ranging from M12 to M150 & 1/2" to 6" Length: up to 1000 mm Specifications: IS, BS, ASTM A193, ASTM A320. STAINLESS STEELTP304 Basic grade of stainless steel. Good resistance to high temperature oxidation up to 900 C, Very good mechanical strength and creep resistance. Main applications : Pipe and heat exchanger tubes for chemical and petrochemical industries and for boilers.TP304H TP 304 with guaranteed carbon content which gives a batter creep resistance. Similar Oxidation resistance to TP 304. Main applications : Heatexchangers, chemical and petrochemical furnaces.TP304L Low Carbon version of TP 304 guaranteed no creep resistance above 500 C. Good high temperature oxidation up to 900 C. Main applications: Pipe and heat exchanger tubes in chemical, petrochemical and food industries.TP309S Corrosion resistance similar to, but better than, that of Type 304, Good resistance to high temperature oxidation up to 1093 C, Very good creep strength and weld ability .Main applications: Heat Exchanger and condenser tubes, also for sheath tubes on electric heating elements.TP316 Good resistance to high temperature oxidation up to 900 C. Very good mechanical and creep strength resistance. Main applications : Pipe and heat exchanger tubes in chemical and petrochemical plant. Boilers and food industry.TP316L Low carbon version of TP 316.2 which guaranteed no creep resistance above 500 C, Good high temperature oxidation resistance up to 900 C. Main applications : Pipe and heat exchanger tubes in chemical, petro chemical and food industries.TP316Ti General corrosion resistance properties rather similar to TP 316, Good resistance to high temperature oxidation up to 900 C. Main applications : Pipe and heat exchanger tubes in chemical, petrochemical and food industries.Boilers and furnace.TP317L Properties similar to TP 316L Main applications : Pipe and heat exchanger tubesTP321 General corrosion resistance similar to those of TP 304. Good high temperature oxidation resistance up to 900 C. Very good mechanical strength and creep resistance. Main applications : Pipe and heat exchanger tubes in chemical and petrochemical plant.TP321H Carbon version of TP 321 which ensures greater creep resistance, Behaves much the same as Type 321 in oxidation resistance. Main applications : Heat exchangers, furnaces, boilers in chemicals and petrochemical plant.TP347 Properties similar to those of TP 321. Main applications : Pipes and heat exchanger tubes in chemical and petrochemical plant.TP410Type 410 is least expensive stainless steel. Good resistance to high temperature up to 700 C Main application : Exchangers in petrochemical industry, heat recuperatorsTP420 Good corrosion resistance and good high temperature oxidation resistance up to 700 C. Excellent mechanical characteristics. Main applications : Threaded pipe for oil wellTP446 Highest heat resistance ferritic stainless steel. Excellent corrosion resistance to nitric acid, concentrated suffric and most alkalies. Good high temperature resistance to 1100 - 1140 C. Main applications : oil and gas furnaces, steam boilers, muffle tubes.CHEMICAL COMPOSITION: CHEMICAL COMPOSITION ( IN PERCENTAGE ) Grade C (Max) Mn (Max) P (Max) S (Max) Si (Max) Cr Ni Mo Nitrogen (Max) Cu/ Others 301 0.15 2.00 0.045 0.030 1.00 16.00 - 18.00 6.00 - 8.00 - 0.10 - 304 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 10.50 - 0.10 - 304L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 12.00 - 0.10 - 310S 0.08 2.00 0.045 0.030 1.50 24.00- 26.00 19.00 - 22.00 - - - 316 0.08 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 - 316L 0.030 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 - 317 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 14.00 3.00 - 4.00 0.10 - 317L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 0.10 - 321 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 12.00 - 0.10 Ti5 ( C + N ) Min or 0.70 max 347 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 13.00 - - Cb= 10x ( C Min ) or 1.00 Max 409 0.08 1.00 0.040 0.010 1.00 10.50 - 11.75 0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max 409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00- 12.00 1.5 max. - - Ti= 6x (C) Min or 0.70 Max 410S 0.08 1.00 0.040 0.030 1.00 11.50- 13.50 0.60 - - - 410 0.15 1.00 0.040 0.030 1.00 11.50- 13.50 0.75 - - - 420 0.35 0.50 0.035 0.015 0.50 12.00 - 13.00 0.20.3 - - - 430 0.12 1.00 0.040 0.030 1.00 16.00 - 18.00 0.75 - - - JSL AUS 0.08 7.08.0 0.070 0.030 0.75 15.50 - 16.50 4.25 - 4.75 - - 0.9 - 1.10 JS- 203 0.08 9.2510.25 0.070 0.030 0.75 14.25 - 15.25 2.25 - 2.75 - - 1.60- 2.0 301M 0.10 4.55.5 0.060 0.030 0.75 14.50 - 15.50 6.0 - 7.0 - - 1.70- 1.90 * Thickness of 1.27mm & below will have elongation of 20% min.