Steel Building - Pre-engineered Structure With Custom Lengths And Widths, Enhanced Roof Slope For Optimal Performance

We are engaged in offering excellent quality Steel Building to our valuable clients. Pre-engineered buildings are defined by the following basic parameters: Building Width, Length, Height, Roof Slope, End Bay Length, Interior Bay Length, Brick Wall and Design Loads.
Building Length
Building length is the distance between the outside flanges of end wall columns in opposite end walls. It is a combination of several bay lengths.
Building Width (Span)
It is the distance from outer face of side runner of one side to outer face of side runner of opposite side.
Building Height
Building height is the eave height, which is usually the distance from the bottom of the main frame column base plate to the top outer point of the eave strut. When columns are recessed or elevated from the finished floor, eave height is the distance from the finished floor level to the top of the eave strut.
Roof Slope (x/10)
This is the angle of the roof with respect to the horizontal. The most common roof slopes should not be less than 5. Any practical roof slope is possible.
End Bay Length
This is the distance from the outside of the outer flange of end wall columns to
the center line of the first interior frame column.
Interior Bay Length
This is the distance between the center lines of two adjacent interior main frame columns. The most common bay lengths are 6, 7.5, and 9 meters. Any bay length is possible up to 15 meters.