Waterproof Coating Chemical

We hold immense expertise in manufacturing and exporting an extensive range of Waterproof Coating. This coating is highly demanded in the market due to its longer shelf life. Offered coating is suitable to be applied on wall and floor for waterproofing application. A team of our experienced chemical experts precisely process this coating by making use of quality approved chemical compounds in adherence with the chemical industry norms. Clients can avail this Waterproof Coating from us with in a promised time period.

Features:

• Safe to use
• Environment friendly
• High effectiveness

Waterproof 118 is a styrene acrylic copolymer of fine particle size, free of solvents. Waterproof 118 is highly cement compatible and is used for flexible membranes for terrace, chajjas and roof waterproofing. Waterproof 118 can also used for very flexible mortars and cement containing insulating coatings.

APPLICATION PROCEDURE

• Clean and scrub the surface with water to free from dust, greese, oil or any other contaminant that could impair adhesion.
• Cracks if present should be widened and then filled with POLYBOND ACRO mortar. Allow it to cure properly
• Then damp down the concrete surface with clean water.
• In a clean vessel mix 1kg WP-118 with 1.5 Kg fresh Portland cement. Stir it properly to a lump free consistency. Apply the slurry on the surface by brush properly.
• Apply the second coat after 10-12 hours interval/next day and allow to set for 48 hours
• Cure the surface with water by light spraying or moist gunny bags for 3-4 days.
• Do the pond test to check any leakage

Note

• Prepare adequate amount of material which can be used in 30 minutes.
• Donot retemper the blend again and again with water.
• Fiber glass cloth can also be reinforced between two coats or fine quartz sand can also be added to the blend to increase the toughness of the film
• Wash the brush immediately after use.

• Excellent adhesion. Bonds to porous and non- porous surfaces
• Breathable whilst repelling water, allows substrate to breathe
• High resistance to carbon di oxide and chloride diffusion
• Non toxic & good chemical resistance

Uses:

• In roof slabs, terraces, chajjas, sloping and folded plate roofs etc
• Water tanks, bathrooms, toilets etc
• Internal and external plastered surfaces, floorings etc

Packing : 1,5,20,50 kgs